references
Axial air heaters
DESCRIPTION
High-efficiency fan motor assembly
Silent FMA featuring an aluminium epoxy polyester-coated airfoil propeller to ensure the best compromise between air flow efficiency and acoustic comfort. The ROTOREX design (windings inserted in the fan hub) keeps the motor cool to ensure that it operates at optimum efficiency. Three versions are available : THREE-PHASE 2 speed (230/400V - 3Ph - 50Hz) (accessory LS/HS switch) SINGLE PHASE 1 variable speed (230V - 1Ph - 50Hz) (accessory 5-speed autotransformer) CORROBLOC version guaranteed to withstand corrosive environments.
HEE FMA
Fan motor assembly equipped with a powerful HEE EC (electronically commutated) motor. These EC motors (single-phase 230V - 1Ph - 50/60V drive) will be progressively controlled by the 0-10 V signal, to ensure acoustic comfort and air flow efficiency and to optimise consumption of electricity. A shunt can be used to operate the air heater at maximum speed.
CORROBLOC FMA IP65/700-hour salt spray test
Casing
• Elegant galvanised steel casing, pre-coated with RAL 7035 (light grey) paint (stainless steel version available on request). • Condensate drain pan built-in for cooling applications, featuring an antibacterial design (perforated bottom) and quick-release fitting (diameter 1'1/4). • Intake section optimised for improved air flow performance and acoustic comfort level. • Advantages: - Its classic design means that it can easily blend into the architecture of the installation site. - No need to add an unsightly condensate drain pan. - Condensate pipes quick and extremely simple to connect, without any need for a clamp, (1'1/4 diam. quick-release fitting).
Heat exchanger
HIGH EFFICIENCY heat exchanger coil with tapered intake baffles, to help pressurise the finned block, available in four versions: LP hot or cold water version – Available with 1, 2 or 3 rows: • Copper tube Ø 9.52 mm • Embossed aluminium fins – Thickness 10/100 mm • Fin spacing 2.1 mm • Advantage: Excellent thermal yield (dry transfer coefficient > 50 W/m².k) HP superheated water - oil version – Available with 1 row: • Heavy-gauge steel tubing (Ø 16 mm) (Stainless steel available on request) • Embossed aluminium fins – Thickness 28.5/100 mm • Fin spacing 2.5 mm • Compatible for use with thermal oils • Advantage: robust finned aluminium coil block suitable for use in industrial environments (dirty air) and may be cleaned using a high-pressure water jet. HP steam version – Available with 1 row: • Heavy-gauge cupronickel tubing (Ø 16 mm) • Embossed aluminium fins – Thickness 28.5/100 mm • Fin spacing 2.5 mm • Advantage: excellent corrosion resistance thanks to chemicals pumped through steam network piping. Electrical version – Four capacities available: • Stainless steel single-tube heating element • Embossed aluminium fins – Thickness 10/100 mm • Fin spacing 2.5 mm • Double overheating thermostat with automatic and manual reset for compliance with fire safety standards (CH37) • Advantage: Heating elements inserted directly into the finned block ensure excellent heat transfer.
Diffuser