Safety options Soft start for the optional centrifugal supply air and/or return air fan, increasing the warm-up time, mainly intended for installations with textile ducts. Compulsory with motors of 15 kW and above. Differential pressure switch to detect fouled filters. Differential pressure switch for checking the air flow. Smoke detection unit compliant with the NF S 61-961 standard. Refrigerant leak detector with measuring sensor.
RS485 serial cards for communication with Carel, ModBus, LonWorks®, BACnetTM MSTP or Konnex protocols. The pCO Web Ethernet card for communication using the ModBus TCP/IP, BACnetTM Ethernet, TCP/IP, SNMP V1-2-3, FTP and HTTP protocols.
SEI4C seaworthy packaging. Skids for transport in a closed container (except for MC1 and MRC1 assemblies).
System start-up and 1-year warranty extension, including parts, labour and movement. System start-up and 2-year warranty extension, including parts, labour and movement.
Power supply with neutral. Marking of the electrical cables. Marking of the components in the electrical cabinet. High performance phase monitoring relay. Electric energy meter to monitor the installation's electricity consumption. Calculation of heating and cooling capacities.
Local TCO terminal to replace the pGD1 terminal. Remote control kit for up to 200 m from the pGD1 terminal (pGD1 terminal + 2 TCONN cards). Return and outdoor air relative humidity sensors: required for enthalpic or thermo-enthalpic free cooling. Room air temperature sensor: if the unit requires the
CIAT has developed different supervision solutions based on the dimensions of the installation. pCO Web This is the solution for managing and supervising a single unit if this incorporates the Ethernet pCO Web card. PLANTWATCH PRO3 This is a solution designed for the supervision of smalland medium-sized installations, capable of managing up to 30 units. Adapted for technical environments. Includes: a 7” touchscreen, a buzzer for notifications and 1 USB port and 1 SD card for downloading report, loading templates and applying service packs. For this option, each unit requires a Carel / ModBus RS485 card. PLANTVISOR PRO2 This is the solution for managing and supervising air conditioning installations up to 300 units. It offers advanced monitoring and maintenance functions, and allows zones and groups to be created to simplify management of the installation. This solution also allows energy measurements to be integrated to monitor the installation's electricity consumption. PlantVisor PRO2 is available in two versions: - Box: formed by the CPU and, as an option, a monitor and keyboard. - Touchscreen: comprising the CPU and touchscreen in a single device. For this option, each unit requires a Carel / ModBus RS485 card.
pCO Web (1 unit)
PlantWatch PRO3 (10 units)
RJ12 0.8 m
TCONN pGD1 terminal
PlantVisor PRO2 (300 units)
outdoor air relative humidity sensor (optional), the room sensors cannot be wired to the card (standard), and must instead be connected using a Field-bus. Room air enthalpy sensor: required on units with gas burner + enthalpic or thermo-enthalpic free cooling. Communications The CIATrtc control allows communication to be established with a centralised management system using a specific CMS card for one of the following communication protocols:
These systems are used to manage the installation remotely. All the information on the system can be accessed via a simple internet connection. The online interface, the same one used by the local PlantVisor user, enables monitoring and complete configuration of the installation, from the office or anywhere else the user happens to be. To control multiple sites remotely, PlantVisor PRO2 offers special tools dedicated to centralised management, such as RemotePRO and RemoteValue.
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 17.01 A
SPACE PF 415 - 1200