references
Ductable units
COADIS COMBI
OPERATING
RANGE
Flow rate range in m3/h 150 to 450 250 to 600 300 to 650 300 to 750 Range on each side in m 1,9 to 4,3 2,1 to 4,3 2 to 4,2 2 to 4,8 COADIS COMBI SR / 600 / 200 / 3,3 SR / 600 / 250 / 3,3 SR / 675 / 200 / 3,3 SR / 675 / 250 / 3,3
INSTALLATION
EXAMPLE
Partitioned office Office with partition options
The product's large operating range enables numerous options in terms of installation location.
OFFICE 3T
CF LINE U
Corridor
OFFICE 2T
OFFICE 3T
CF LINE U
OFFICE 2T
OFFICE 4T
OFFICE 3T
Installation as desired depending on the position of the partitions Open plan office
OFFICE 4T
CF LINE H
Installation of a unit every other wall section
Installation of a unit every other wall section
SPECIFICATION
- The air supply/return distribution plenums will be equipped with circular directional nozzles. They allow the range of the air jet to be adjusted, as well as ensuring a high speed and a high primary induction rate at the diffuser outlet. - They will be designed to ensure a good Coanda effect, even at low flow rates, in order to comply with the comfort indices of the ISO 7730 standard. - Their design must be aerodynamic in order to save energy (required operating pressure as low as possible). - The performance of the AHUs must be specified and guaranteed taking into account the supply air/return plenum. - They must be thermally insulated (to prevent condensation phenomena) as well as acoustically. - They will diffuse towards glass walls and internally in a lengthwise direction throughout the office, and must not diffuse towards the sides, so as to prevent interaction with the internal partitions. They will also be able to be installed in open plan offices without interaction between the various air jets. - They must be designed so as to prevent any bypass between the supply air and the return air, so that the technical performance of the AHU is not compromised, even at the lowest speed. Please contact us for details of the performance and tariffs.
400
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 17.01 A
Corridor