references
Air-Cooled Liquid chillers & Reversible Air to Water Heat Pumps
EREBA ACCESS
Easy and fast installation
Hydronic module available Compact, reliable and
efficient
Nominal cooling capacity : 8-40 Nominal heating capacity : 17-40
kW kW
50
Cooling or heating
410A
USE
The EREBA ACCESS air-to-water heat pump / chiller is designed for heating and cooling applications in individual homes and small commercial applications. When installed alone, EREBA ACCESS is compatible with low to medium temperature emitters (underfloor heating, fan coil units, water cassettes, radiators, mixed installations, etc.). EREBA ACCESS is also compatible with medium to high temperature emitters for boiler backup operation. The EREBA ACCESS unit is installed outside in an open area, ideally as close as possible to the machine room. Each unit is tested in the factory and delivered ready for operation. - End-of-line test of all unit operating parameter - Circuit leakage, electrical compliance, water and refrigerant pressures.
RANGE
EREBA ACCESS's range is composed by 8 models in cooling only and 5 models reversible. Operating range EREBA ACCESS : - Cooling mode with an outdoor temperature from -10°C to 46°C (or 48°C for 17-40 models) - Heating from -15°C to +40°C. If the heat pump is the only source of heat: Below this temperature, heating must be provided by a separate heating source or an additional electrical supply If the heat pump is used for backup operation: Operates down to the equilibrium point (temperature below which the heat pump can no longer keep up with heating needs). Below this point, the heat pump and boiler run alternately (heat pump OR boiler).
CONFORMITY
Low Voltage Directive 2014/35/EU EMC : ElectroMagnectic Compatibility 2014/30/EU PED : Pressure Equipment Directive 2014/6/EU WEEE : Waste Electrical & Electronic Equipment 2012/19/EU RoHS : Restriction of Hazardous Substances Directive 2011/65/EU
16
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 17.01 A