references
QUICK
SELECTION
GeoCIAT Access 18H 4,74 4,11 % kW 4,35 166 4,7 kW A++ 4,48 kW 3,23 4,19 2,6 % kW 3,14 118 4,2 kW A+ 6,12 kW 5,43 5,77 4,08 1,1 53
Heating capacity at 0/-3°C 30/35°C* COP* SCOP
Heating capacity at 0/-3°C 40/45°C* COP* Heating capacity at 0/-3°C 47/55°C* COP* SCOP
Heating capacity at 10/7°C 30/35°C* COP* Heating capacity at 10/7°C 40/45°C COP
Water flow rates
IMPORTANT: The minimum flow rates must be observed. If they are not, the exchanger may be damaged by frost. CIAT shall not be held liable for frost which results from flow rates below the minimum flow rates stated above. The nominal flow rates are used to size the hydraulic system.
GeoCIAT Access
3/h)
18H 0,57
3 3
Outdoor heat exchanger
1,15 1,9 0,45
Indoor heat exchanger
3/h) 3/h)
1
(1) 0/-3°C // 30/35°C mode (2) 10/7°C // 30/35°C mode
Water connections
System pipe diameters calculated for a hydraulic connection for your machine of 15 m between the unit and the rest of the system.
GeoCIAT Access 18H
Copper pipe hydraulic connection 28 x 1
Steel pipe hydraulic connection 33/42 - DN32 1’’ 1/4
PE pipe hydraulic connection 32 x 2.9
HEAT PUMPS - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 17.01 A
197
GeoCIAT™ Access
2
Heat pump Heating only, glycol/water mix / glycol/water mix