references
Air handling unit
CLIMACIAT
Electric heater
- Shielded resistors in stainless steel scrolled finned pipes Connection to copper jumper strips. - Assembly with double insulation. - The electric heater is equipped with two safety thermostats. The first has a manual reset, the second has an automatic reset.
OPTIONS AVAILABLE PER RANGE Paint on tracks 304 L or 316 L stainless steel tracks 304 L or 316 L stainless steel coil panelling Single- or three-phase connection
X: Option NA: Not applicable
- To set up the coil, refer to the instructions sent with each unit. - Take the necessary measures to prevent abnormal overheating when the fan is switched off (fan delay).
Airaccess
X NA NA X
Airtech
X X X X
Airclean
X X X X
Refrigeration coil
Fluids: - Chilled water • Construction with copper tubes and aluminium fins. • Operating pressure for water: 8 bar as standard - Higher pressures on consultation. • Sloped condensate drain pan with drain tubes to be connected on site to a siphon (compulsory requirement). • Droplet separator as standard if necessary, as an option on request. • Removable sealing flanges between casing and manifolds up to 3” diameter, preventing damage to the sealing system during connection.
Depending on the type of coil and the diameters required, the manifolds and supply tubes are - Copper tubes with unions up to a diam. of 2”1/2. - Grooved steel tubes for larger diameters. - Direct expansion evaporation • Construction with copper tubes and aluminium fins. • Sloped condensate drain pan with drain tubes to be connected to a siphon on site (compulsory requirement). • Droplet separator as standard if necessary, as an option on request. • Standard smooth copper refrigerant supply tubes (supplied capped) • Manifold on fluid intake as standard.
OPTIONS AVAILABLE PER RANGE Chilled water coil Direct expansion evaporation coil Access panel on droplet separator
Airaccess
X X X
Airtech
X X as standard if compulsory X X X X X X X X X X X X X X X X X X X X X X X X
Airclean
X X X X X X X X X X X X X X X X X X X X X X X X X X
Stainless steel tubes on consultation, for water Copper fins
NA X X X X
Paint on tracks Stainless steel tracks 304 L or 316 L stainless steel coil panelling 316 L stainless steel condensate drain pan 316L stainless steel hygienic tank Standard tray insulation Manifold insulation All stainless steel droplet separator (frame and medium) Polypropylene blade separator, galvanised frame Polypropylene blade separator, stainless steel frame Aluminium blade separator, galvanised frame Aluminium blade separator, stainless steel frame Pressure tapping, upstream and downstream Standard screw flanges Stainless steel screw flanges Tubes with quick connections (copper tubes) (victaulic type) Threaded connections (steel tubes) Frost protection sensor slide
X: Option NA: Not applicable
X NA NA X NA X X X X NA NA NA X X X X X X
454
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 17.01 A